-
Advantages of new aluminum wood doors and windows
2019-12-19
There are two types of doors and windows, one is aluminum-clad wood doors and windows, and the other is wood-clad aluminum doors and windows. 1. The concept of aluminum-wood composite was originally introduced by Germany, and domestic manufacturers have processed this concept and imitated aluminum-wood composite doors and windows in form, so today there is aluminum-clad wood. 2. From the appearanc...
-
The role of various elements in aluminum alloy
2019-12-09
Cu The maximum solubility of copper in aluminum is 5.65% when the aluminum-rich portion of aluminum-copper alloy is 548, and the solubility of copper is 0.45% when the temperature drops to 302. Copper is an important alloying element and has a certain solid solution strengthening effect. In addition, Cu Al2 precipitated with aging has a significant aging strengthening effect. The copper content in...
-
Vietnam adopts anti-dumping measures against Chinese aluminum profiles
2019-10-17
The Ministry of Industry and Trade of Vietnam recently issued a decision to take anti-dumping measures against some aluminum extruded profiles from China. According to the decision, Vietnam imposed a 2.49% to 35.58% anti-dumping duty on Chinese aluminum extruded bars and profiles. The number of Chinese aluminum profile manufacturers surveyed was 16. Previously, the Ministry of Industry and Trade o...
-
WBMS Report: The supply gap of primary aluminum market in January-July 2019 was 651,000 tons
2019-09-20
According to data released by the World Bureau of Metal Statistics (WBMS) on Wednesday, the raw aluminum market supply gap was 651,000 tons from January to July 2019, and the gap was 855,000 tons in 2018. The demand for primary aluminum in January-July 2019 was 36.5 million tons, an increase of 655,000 tons from the same period in 2018. From January to July 2019, primary aluminum production increa...
-
An Introduction to Aluminum Extrusion and Profiles
2019-08-30
The aluminum extrusion (also known by ‘aluminum frames’) forming process is a bulk plastic deformation process. First, a billet of aluminum is preheated to a specified temperature that is still comfortably below the material melting point in order to facilitate the plastic flow of the material. The heated billet is then forced through a tooling die that is designed to shape and form the bill...
-
Aluminum Profiles With Correct Shape Size And Accuracy
2019-08-09
Aluminum Profiles in aluminum extrusion process is important, is to ensure product formation, so that it has the correct shape, size and accuracy of the basic tools. In actual production, in view of some problems that may occur in extruded hollow aluminum profiles, we give the corresponding method of repair. First, has the seam angle or welds the bad Hollow Aluminum Profiles s using planar shunt c...
-
Practical Application of Numerical Simulation for Extrusion Process and Die Design Optimization of a Complex Multi-cavity Aluminum Profile
2019-06-14
Aluminum alloy has the advantages of high specific strength, good processing properties (such as weldability and pressure processing properties), strong corrosion resistance and excellent environmental performance (easy recycling), and has become a civil building and track. Important engineering materials in the fields of transportation, aerospace and shipbuilding.Complex multi-cavity aluminum pro...
-
Causes and solutions for the formation of surface particles of extruded aluminum profiles
2019-05-31
Abstract: In the extrusion production of aluminum profiles, some small particles on the surface of the profile are adsorbed on the surface of the profile, and the touch is touched, which affects the surface appearance of oxidation, electrophoretic painting and sprayed profiles, and reduces production efficiency and Yield.Therefore, the formation mechanism is analyzed to take measures to reduce or ...
-
Typical defects and causes of aluminum alloy profiles
2019-05-09
1. Aluminum alloy profiles bending and twisting, wave Due to the unreasonable design of the die hole, the extrusion speed is too fast, the die hole lubrication is not proper, the guide path is not suitable or the guide is not installed. 2. Bubbles and peeling due to the inner diameter of the extrusion barrel is excessively worn, the gap between the pressing pad and the barrel is too large; the ext...
online service
0086 13635632360
sales@sxalu.com
008617309695108
English
français
Deutsch
русский
español
português
العربية
ไทย
Việt
Українська