0086 13635632360

Electrophoresis coating aluminium profile
Home / Blog / What should be paid attention to when using cnc machining center

What should be paid attention to when using cnc machining center

July 17,2020.
The following standards must be considered for all normal applications of the machining center. The operating voltage of the switching power supply of the CNC lathe is small, the operating temperature is less than 30 degrees, and the relative temperature is less than 80%.

1. Natural environment regulations for the processing center
The location of the machining center should be free of vibration sources, the direct sunlight and radiant heat should be prevented, and the humidity and cyclones should be prevented. If there are vibration sources around the CNC lathe, vibration isolation grooves should be set around the CNC lathe.

2. switching power supply regulations
Where the machining center is installed, the operating voltage of the switching power supply must be strictly controlled. The operating voltage fluctuations of the switching power supply must be within the allowable range and remain stable.

3. Temperature Standard
Generally speaking, an exhaust fan or an industrial cooler is installed inside the electrical control cabinet of the CNC machine tool to maintain electronic components. Excessive temperature and ambient humidity will cause the service life of automatic control system components to decrease and cause common failures to increase.

4. the application of CNC lathes as required
When using a CNC lathe, it is not allowed to change the main parameters set by the manufacturer in the automatic control system. The value of the main parameters can be adjusted according to the specific situation, and it is not allowed to disassemble and replace the machine accessories. The working pressure of the hydraulic chuck, hydraulic machine tool bed, hydraulic locomotive tool holder, and hydraulic cylinder should be within the allowable stress range, and no arbitrary lifting is allowed.

Shengxin is a manufacturer of aluminum profiles for industrial applications and architectural systems. Choose aluminum extrusion profiles from our company now!