Wire drawing can eliminate abrasions, scratches, and machining knife marks on aluminum alloy profiles. The degree of elimination is related to the depth of wire drawing. Generally speaking, the greater the depth of wire drawing, the stronger the ability to eliminate physical defects on the aluminum alloy surface. However, for the demanding wire drawing treatment, it is necessary to use polishing or polishing to eliminate the surface defects of the workpiece in advance, especially for the thin wire. In addition to the above-mentioned elimination of surface defects of aluminum alloy workpieces, wire drawing can improve the texture of metal materials and provide a strong decorative effect to increase the appearance of the product. This is also the current A commonly used decoration method. In recent years, wire drawing has been widely used in the shell decoration of a variety of electronic products, such as notebook computer panels, keyboards, mobile phone panels, and other digital product-related components.

The surface drawing of aluminum alloy is carried out by a wire drawing machine. For small flat workpieces, a flat pressure type abrasive belt drawing machine can be used. According to the different surface requirements of the product, the coarse-grained abrasive belt can be selected to process a rough, For silk patterns with obvious hand feeling, fine-grained sanding belts can also be used to process finer silk patterns. For small workpieces, a rubbing machine with a simpler structure can also be used. The thickness of the wire can also be controlled according to the size of the abrasive block. Roller brush wire drawing or wide abrasive belt wire drawing can also be used for large workpieces or plates. For the specific operation method of wire drawing, please refer to the operation manual of the wire drawing equipment...